



Zpont Portable Gantry CNC Plasma Cutting Machine — Dual-Rail Straight-Line Plasma Cutter, 1500×3000 mm
- Cuts mild steel up to 25 mm (1 in) — also stainless, aluminum, copper, brass
- ±0.5 mm repeatability on a 1,500 mm-wide gantry
- 85% pre-assembled — two people set up in under 1 hour
- Runs G-code / DXF from USB — no PC needed on the floor
- Works with LGK-60/100 and Hypertherm Powermax 65–105
- 1-year warranty + spare-parts kit in the box + lifetime remote support
MOQ 1 set · Lead time 3–7 days · Sea / air / express worldwide
Why Buyers Choose the Zpont ZP-1530
A portable plasma table that behaves like a fixed industrial machine. The gantry breaks into light sections one person can carry, bolts together on any flat floor, and holds ±0.5 mm across a full 1.5 × 3 m sheet — so you can cut in the workshop, on site, or in the field without moving the plate.
- Portable without giving up rigidity: 6063-T5 extruded aluminum cross beam with machined mounting faces, riding on hardened and ground steel rails — the beam does not flex or chatter under cutting load.
- Fast to set up, fast to recover: bolt-together frame, colour-coded cables, and a controller that remembers where it stopped — after a power cut or a tip-up, press resume and continue the same path.
- Cut quality you can sell: square, dross-free edges on 1–16 mm plate with a 100 A source; typical bevel under 3° and kerf 1.5–2.5 mm, so downstream grinding drops sharply.
- Low running cost: standard consumables available worldwide, roughly 1.5–2.5 hours of continuous 100 A cutting per electrode/nozzle set.
- Grows with the job: add rail sections for longer panels, add a motorised Z-axis (THC) for warped plate, add a rotary axis for pipe and tube.
Technical Specifications
All figures below are for the standard ZP-1530 configuration with a 100 A air plasma source. Tell us your material, thickness and daily output and we will confirm the exact configuration before you pay.
| Model | ZP-1530 portable gantry CNC plasma cutter (ZP-1540 / ZP-2040 available) |
|---|---|
| Structure | Modular dual-rail gantry, bolt-together, no foundation required |
| Effective cutting width (X) | 1,500 mm — optional 2,000 / 2,500 mm |
| Effective cutting length (Y) | 3,000 mm per rail setup — extendable in 1,500 mm sections |
| Rail | 45# carbon steel, ground finish, surface hardness HRC 45–50 |
| Cross beam | 6063-T5 extruded aluminum alloy, machined ends, anodised |
| Guidance | V-groove roller bearings on X, linear guide on Y, adjustable preload |
| Drive | Stepper motor + precision rack & pinion (module 1.5), belt-reduced |
| Travel speed | 0 – 8,000 mm/min |
| Cutting speed | 0 – 6,000 mm/min (material dependent) |
| Positioning accuracy | ±0.3 mm |
| Repeatability | ±0.5 mm |
| Z-axis | Manual torch clamp standard; motorised THC optional |
| Machine weight | ≈ 120 kg (gantry, without plasma source) |
| Floor requirement | Flat concrete, level within 3 mm / 3 m, no anchoring needed |
| Material | Clean cut | Max. severance | Notes |
|---|---|---|---|
| Mild steel (Q235 / A36) | 1 – 16 mm | 25 mm | Best all-round performance; pierce limit 20 mm |
| Stainless steel (304 / 316) | 1 – 12 mm | 20 mm | Use Nitrogen for oxide-free edges |
| Aluminum | 1 – 10 mm | 15 mm | Air or Nitrogen; clamp firmly to avoid warping |
| Galvanized sheet | 0.8 – 10 mm | 12 mm | Use fume extraction — zinc oxide smoke |
| Copper / brass | 1 – 6 mm | 8 mm | Higher current and slower speed recommended |
| Expanded metal / grating | — | — | Cuttable; raise plate 30 mm off the bed |
With a 60 A source: mild steel clean cut 1–12 mm, stainless 1–10 mm, aluminum 1–8 mm. Typical kerf 1.5–2.5 mm, bevel ≤ 3°.
| Controller | Starfire SF-2300C class, 7″ colour LCD (800×480), industrial panel |
|---|---|
| Alternative | Fangling F2100B / F2300B on request |
| Input files | G-code (.nc / .txt), DXF via converter; USB 2.0 flash drive |
| Memory | 256 MB internal, unlimited via USB |
| Cutting functions | Nesting, kerf compensation, lead-in / lead-out, hole slowdown, kerf-cut for small holes, mirror, rotate, array, breakpoint resume, dry run |
| Torch height | Arc voltage THC interface (with optional THC box); manual Z standard |
| Languages | English, Spanish, Russian, Chinese (others on request) |
| Software bundle | DXF-to-G-code converter + SheetCam post-processor, free with machine |
| Learning curve | About 30 minutes for an operator with basic shop experience |
| Machine power | 220 V ±10%, 50/60 Hz, single phase, 500 W |
|---|---|
| Plasma source power | 380 V 3-phase (100 A) or 220 V single phase (60 A) — source dependent |
| Air pressure | 0.6 – 0.8 MPa (87 – 116 psi), regulated at the source inlet |
| Air flow | ≥ 200 L/min for 100 A cutting; ≥ 120 L/min for 60 A |
| Air quality | Dew point ≤ 5 °C, filtration 0.01 µm — refrigerated dryer + coalescing filter strongly recommended |
| Grounding | Independent earth, resistance ≤ 4 Ω |
| Environment | -10 °C to 45 °C, humidity ≤ 85% non-condensing, indoor or covered |
| Duty cycle | Continuous motion; plasma source duty cycle per its own rating (typically 60–100% at 100 A) |
| Standard consumables | Electrode, nozzle, shield cup, swirl ring — matched to your plasma torch model |
|---|---|
| Consumable life | ≈ 1.5–2.5 h continuous cutting at 100 A (air quality dependent) |
| Spare-parts kit (included) | 2 electrodes, 2 nozzles, 1 shield, 3 fuses, 2 limit switches, 1 drive belt, 4 bearings |
| Optional: THC | Motorised torch height control with arc-voltage sensing — recommended for plate > 8 mm or warped sheet |
| Optional: water table | Reduces smoke and distortion on thin sheet |
| Optional: rotary axis | Cuts pipe / tube up to Ø300 mm |
| Optional: extraction | Downdraft table or fume arm for indoor shops |
* Specifications are for reference. Final configuration, including plasma source brand and rail length, is confirmed in your quotation. OEM branding and 110 V / 60 Hz variants available.
Applications & Typical Jobs
One machine covers repair work, fabrication and light production. Below are the jobs buyers use the ZP-1530 for most, with the configuration that suits each.
Structural & Steel Fabrication
Base plates, gussets, stiffeners, anchor plates, beam copes and connection plates cut to drawing in one pass.
Trailer & Truck Body Building
Chassis brackets, floor plates, side panels, mudguard shapes and custom cut-outs for lights and hitches.
Farm & Equipment Repair
Wear plates for ploughs and buckets, blade edges, feed mixer patches, on-site repair of implements without hauling them to town.
HVAC & Ductwork
Flanges, hangers, access panels and transition pieces; clean edges mean less sealing and faster assembly.
Metal Art & Signage
Lettering, logos, decorative panels and garden art from DXF files — fine detail down to 3 mm features on thin sheet.
Job Shops & Maintenance
One-off parts and small batches without programming hours — import the DXF, nest, cut, done.
| Your work | Recommended machine | Plasma source | Add-ons worth it |
|---|---|---|---|
| Signage, art, sheet ≤ 6 mm | ZP-1530, 3 m rails | LGK-60 (60 A) | Water table, fine consumables |
| General fabrication, 6–16 mm | ZP-1530 standard | LGK-100 (100 A) | THC, fume extraction |
| Heavy repair, 16–25 mm | ZP-2040, 4 m rails | LGK-120 / Powermax 105 | THC, air dryer, spare torch |
| Pipe, tube, post caps | ZP-1530 + rotary axis | LGK-100 | Rotary chuck Ø300 mm |
Build Quality & Workmanship
This is not a folded-sheet kit. Every structural part is machined, ground or anodised before assembly, and every finished machine is test-cut on real steel before it is packed — we send you the test video with your serial number.
- Rails: 45# carbon steel, ground to Ra 1.6, hardened to HRC 45–50 — resists flat-spotting under the rollers
- Cross beam: 6063-T5 extruded aluminium, machined end faces, hard anodised; torsion-resistant at full 1.5 m span
- Frame: 3 mm wall steel tube with gusseted corners, powder-coated anti-rust finish
- Fasteners: grade 8.8 zinc-plated; stainless where exposed to moisture
- Cabling: shielded, oil-resistant cable in an aviation-grade drag chain with 5 million-cycle rating
- Rack & pinion teeth cut on a CNC hobber, then matched as a set — backlash held under 0.1 mm
- Roller preload set with a dial gauge, not by feel; each axis run in for 30 minutes
- Beam squareness checked to 0.2 mm over 1.5 m diagonals
- Controller panel wired to a labelled harness — colour-coded, pluggable, easy to service
- Every joint torqued to spec and marked with a paint pen at final inspection
Incoming parts
Rail straightness, beam wall thickness and bearing play checked against drawing on arrival at the line.
Sub-assembly
Gantry squared, rack mesh and roller preload set, then dry-run for 30 min per axis.
Electrical
Insulation, grounding and limit-switch test; controller firmware and language set and verified.
Test cut
Real 10 mm steel test piece cut to a 200 mm circle + square; kerf, squareness and repeat cut measured.
Packing
Accessories counted against the checklist, machine photographed, VCI film and foam fitted, case sealed.
Each unit carries a serial number. Send it to us at any time and we can pull up its test record, configuration and shipped accessories.
See It Cut — Real Machines, Real Steel
Watch the ZP-1530 running before you buy: factory test cuts, setup from crate to first arc, and customer machines in daily production. New videos are added every month.
Cutting Demo — 12 mm Mild Steel
Factory test cut with LGK-100: 200 mm circle and square, live kerf measurement, edge quality close-up.
Crate to First Cut in 60 Minutes
Unboxing, rail alignment, cable hookup and the first arc — two people, no special tools, real time.
Packaging, Shipping & Delivery
Machines ship in export plywood cases, break-bulk packed so no single piece is too heavy to handle without a crane. We book the shipment, prepare the documents and send photos of every case before it leaves the factory.
| Case | Contents | Dimensions (mm) | Gross weight |
|---|---|---|---|
| Case 1 | Rails, frame sections, legs | 2,100 × 350 × 320 | ≈ 92 kg |
| Case 2 | Cross beam, controller, cables, accessories | 1,680 × 420 × 450 | &asymp. 78 kg |
| Total | 1 set | ≈ 1.3 CBM | ≈ 170 kg |
| Loading | 20′ GP: about 12 sets · 40′ HQ: about 26 sets (loose, without plasma sources) | ||
Export plywood, fumigation-free (ISPM 15 exempt). Inner protection: VCI anti-rust film, EPE foam, steel strapping; moisture absorber in each case.
FCL or LCL, 25–40 days door-to-port. Best value for full machines and multi-set orders.
To Europe and CIS, 20–30 days. Good balance of cost and speed for inland destinations.
7–10 days airport-to-airport. Used for urgent projects and single machines.
DHL / FedEx 5–7 days for spare parts and consumables, door to door.
| Incoterms | EXW, FOB, CIF, DAP, DDP — quote the one you need, we will price it |
|---|---|
| Payment | 30% deposit / 70% before shipment (T/T); Alibaba Trade Assurance; L/C at sight for orders above $20,000 |
| Lead time | 3–7 working days for standard configuration; 10–15 days for custom rail length or OEM branding |
| Documents provided | Commercial invoice, packing list, bill of lading, certificate of origin, CE declaration, test report, packing photos |
| Customs | HS code 8456.40 supplied; we can pre-clear with your broker and adjust the invoice as your regulations allow |
| Insurance | All-risk marine insurance available at 0.3% of invoice value |
Warranty & After-Sales Service
We sell machines that stay in service. Support runs on a named engineer per region, spare parts are stocked for every model we have shipped, and the warranty is written down — not implied.
| Covered | Not covered |
|---|---|
|
|
Warranty runs 12 months from the bill-of-lading date. Parts are supplied free of charge during the period; freight is covered by us for the first 6 months and shared afterwards.
- Technical reply within 8 working hours (Mon–Sat, GMT+8)
- Remote diagnosis by WhatsApp, WeChat, Zoom or TeamViewer — we log into the controller with you
- Spare parts dispatched within 48 hours; DHL/FedEx delivery 3–7 days
- Emergency parts from our EU and US partner warehouses when in stock
- Named account engineer who keeps the history of your machine
- English manual + 12 step-by-step videos (setup, nesting, first cut, troubleshooting)
- Two free online training sessions, 60 minutes each, scheduled to your time zone
- Paid on-site commissioning available in most regions — ask for a quote
- DXF nesting templates for common jobs supplied free
- Operator refresher training free for the life of the machine
| Part | Typical life | Replacement sign |
|---|---|---|
| Electrode | 1.5–2.5 h cutting at 100 A | Pit depth > 1 mm, arc wandering |
| Nozzle | 1.5–2.5 h | Enlarged or oval orifice, bevel increases |
| Shield cup | 3–5 nozzle changes | Cracked or slag build-up |
| Swirl ring | 5–8 nozzle changes | Worn gas slots, unstable arc |
| Drive belt | 2–3 years | Visible cracking, backlash appears |
Clean, dry air roughly doubles consumable life — it is the single cheapest upgrade you can make.
How to Order
Frequently Asked Questions
Does the price include the plasma source?
The standard price is the CNC gantry, controller and cable set. Plasma sources are quoted as a bundle — LGK-60 from $520, LGK-100 from $890, Hypertherm on request. Tell us the thickest material you cut and we will recommend the right source and torch.
What thickness can it actually cut?
With a 100 A source: 1–16 mm clean cut and up to 25 mm severance on mild steel. Stainless 1–12 mm clean, aluminum 1–10 mm clean. With a 60 A source, halve those figures. For production work above 20 mm, we recommend the ZP-2040 with a 120–130 A source.
Do I need a computer or CAD experience?
No computer is needed at the machine — the controller reads G-code and DXF from a USB stick. You do need a DXF drawing, which any CAD program or a sign-making template can produce; we include a converter and post-processor, and our engineers will convert your first drawing for free.
How long does setup take, and is installation included?
Two people, under one hour: lay the rails, bolt the legs, hang the beam, plug in the colour-coded cables, level and cut. Installation is not included in the machine price; paid on-site commissioning is available in most countries, and free remote commissioning over video is always included.
What are the power and air requirements?
The machine itself runs on 220 V single phase, 500 W. The plasma source needs 380 V three-phase (100 A) or 220 V single phase (60 A), depending on model. Air: 0.6–0.8 MPa at 200 L/min for 100 A, with a refrigerated dryer and 0.01 µm filter — dry air is critical for cut quality and consumable life.
How is it shipped, and how long does delivery take?
Two export plywood cases, about 1.3 CBM and 170 kg total, fumigation-free. Sea freight 25–40 days, rail to Europe/CIS 20–30 days, air 7–10 days, express 5–7 days for parts. We supply invoice, packing list, B/L, CO, CE declaration and test report, and send photos of the packed cases before dispatch.
What happens if something breaks?
Send a video and the serial number. Our engineer replies within 8 working hours, diagnoses remotely (usually the same day) and ships the part within 48 hours if needed. All electronics, motors, drivers and mechanical parts are covered for 12 months; consumables are not, since their life depends on air quality and cutting hours.
Can you supply 110 V / 60 Hz or a custom rail length?
Yes. 110 V machine power with a matched 60 Hz plasma source, custom rail lengths (2 m to 12 m), wider gantries and OEM branding are all available. Custom builds add 7–10 days to the lead time.
Do you offer spare parts and consumables after the warranty?
Yes, for the life of the machine. Standard consumables ship from stock the same day; controllers, motors and drivers are stocked for every model we have sold since 2016. Distributors can hold a consignment locally — ask for the dealer package.
What Buyers Say
recommend this machine
We were torch-cutting patches by hand and grinding them flat. The ZP-1530 drops a cut part in three minutes, square, no grinding. Set it up solo in the yard in about 40 minutes. Controller is simple enough that my apprentice runs it.
cut-parts.jpg
Mainly cutting 6–10 mm stainless for dairy equipment. Edges come off the table clean with almost no dross once I fitted the dryer they recommended. Shipped by rail in 26 days, both cases arrived perfect, packing photos were sent before dispatch which was a nice touch.
Machine itself is excellent — rails are dead straight and it repeats the same cut all day. Took me a while to understand the nesting settings from the manual alone; a video call with their engineer sorted it in 20 minutes. Support is genuinely responsive. Would buy again.
We were torch-cutting patches by hand and grinding them flat. The ZP-1530 drops a cut part in three minutes, square, no grinding. Set it up solo in the yard in about 40 minutes. Controller is simple enough that my apprentice runs it.
cut-parts.jpg
Mainly cutting 6–10 mm stainless for dairy equipment. Edges come off the table clean with almost no dross once I fitted the dryer they recommended. Shipped by rail in 26 days, both cases arrived perfect, packing photos were sent before dispatch which was a nice touch.
Machine itself is excellent — rails are dead straight and it repeats the same cut all day. Took me a while to understand the nesting settings from the manual alone; a video call with their engineer sorted it in 20 minutes. Support is genuinely responsive. Would buy again.
We were torch-cutting patches by hand and grinding them flat. The ZP-1530 drops a cut part in three minutes, square, no grinding. Set it up solo in the yard in about 40 minutes. Controller is simple enough that my apprentice runs it.
cut-parts.jpg
Tell Us What You Cut — We’ll Configure the Machine
Send your material type, thickness and daily output. You get a configuration, a landed-cost estimate and a test-cut video within 24 hours.
Chat on WhatsApp Email Our Engineers